PRO-TRUCK Sport Shock Performance Dampers
View partsFind PRO-TRUCK SPORT SHOCKS for your vehicle
Elevate your Truck's Performance
The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.
- Developed to provide balanced ride quality and control, both on and off-road
- Increased travel and ground clearance
- Monotube damper design
- Clip-height adjustability
Race Winning Technology
The Stage 1 system’s PRO-LIFT-KIT springs are manufactured using race-winning off-road spring technology, ensuring maximum durability and performance. The system's monotube design, 46mm pistons, nitro-coated rod, and heavy-duty zinc coating provide superior performance, while factory control arms prevent accelerated wear to ball joints and bushings.
Twin-Tube
With this design, there is nothing separating the oil and gas inside the chamber. During more aggressive driving scenarios, the fluid and gas can mix, causing aeration. This can negatively affect ride quality. Additionally, twin-tubes have a smaller oil capacity than monotubes, which causes the oil to heat up faster under more aggressive cycles.
PRO-TRUCK Sport Shock
Unlike a basic twin-tube damper, this design eliminates the need for nitrogen gas to be inside the fluid area. Rather, the nitrogen gas is separated from the shock fluid by a free-floating piston. The free piston presses against the gas chamber under aggressive compression to provide extra damping force. Additionally, all of the shock oil is in a single chamber, reducing heat usually caused from having to transfer between the inner and outer cylinders.
PRO-TRUCK Reservoir Performance Damper
Consistent Performance
Eibach's PRO-TRUCK Reservoir shocks are designed and engineered to improve the off-road performance of your vehicle. Unlike traditional shocks, “resi” shocks use a remote reservoir which allows additional fluid to dissipate heat more effectively - reducing shock fade. Resi shocks also allow for more responsive performance by reducing aeration (foaming) of the internal fluids by separating it from the nitrogen gas charge.
- Improved performance on rough terrain
- Increased durability and lifespan of your shocks
- Enhance control and stability in high-speed off-road environments
- Reduced shock fade
Resi Technology
The PRO-TRUCK Reservoir uses our same quality 46mm piston, heavy duty zinc coated cylinder, and nitro-steel shaft from our PRO-TRUCK Sport Shocks. Additionally, custom billet aluminum mounting brackets and fittings ensure our resi shocks will stand up to the abuse of off-road driving.
PRO-TRUCK Sport Shock
Unlike a basic twin-tube damper, this design eliminates the need for nitrogen gas to be inside the fluid area. Rather, the nitrogen gas is separated from the shock fluid by a free-floating piston. The free piston presses against the gas chamber under aggressive compression to provide extra damping force. Additionally, all of the shock oil is in a single chamber, reducing heat usually caused from having to transfer between the inner and outer cylinders.
PRO-TRUCK Reservoir
Increased fluid capacity greatly reduces heat that's created from repeated and extended abuse and improves overall longevity among the shock's components. This feature is especially key for overlanding, as the added weight of skid plates, a roof rack, storage, spare wheel, rooftop tent, and other weight-gaining gear can immensely affect the vehicle's damping qualities on the trail.
Pro-Truck Reservoir 2.5
Uncompromising Performance. Built to Endure.
Built for drivers who demand confidence on and off the road, this large-body 2.5" shock is engineered to deliver uncompromising performance in every condition. Featuring a remote reservoir to increase fluid capacity and efficiently dissipate heat, it significantly reduces shock fade during extended or aggressive use. A high-flow linear piston provides precise high-speed damping control over rough terrain while maintaining the smooth, controlled low-speed performance ideal for daily driving. Constructed with a heavy-duty zinc-plated steel body finished in Cerakote for exceptional corrosion resistance, and reinforced by oversized 7/8" Nitro-Steel piston shafts for superior strength and seal protection, this shock is built to perform hard and last longer.
- Large-body 2.5" diameter shock featuring remote reservoir for additional fluid to dissipate heat more effectively - reducing shock fade
- High-Flow linear piston design for maximum high-speed damping control over rough terrain, balanced with low-speed damping performance desired for daily use.
- Heavy Duty steel body construction zinc plated with Cerakote for unbeatable corrosion resistance and a finish.
- Larger 7/8" Nitro-Steel piston shafts for increased strength durability and resistance to seal damage.
Engineered for Control in Any Terrain
Designed to excel where conditions are unpredictable, this shock’s advanced internal valving and high-flow piston architecture deliver consistent, predictable damping across a wide range of driving scenarios. Whether navigating washboard trails, rocky terrain, or daily pavement, the balanced damping profile keeps the vehicle composed, responsive, and comfortable—giving drivers the confidence to push further without sacrificing ride quality or reliability.
Shop PRO-TRUCK SPORT SHOCKS
160 partsFilters (1)
Availability
Price
Part type
-
PRO-TRUCK Sport Shock (Front)
Single Front Shock for Toyota Sequoia
Ride height: 0-2.0 in front
Mfg# E60-82-095-01-10
$227.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
$227.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Sport Shock (Rear)
Single Rear Shock for Ford F-150
Ride height: 0-1.5 in rear
Mfg# E60-35-002-02-01
$213.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
$148.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Sport Shock (Rear)
Single Rear Shock for GMC
Ride height: 0-1.5 in rear
Mfg# E60-23-005-08-01
$198.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Sport Shock (Rear)
Single Rear Shock for GMC
Ride height: 0-1.5 in rear
Mfg# E60-23-006-02-01
$213.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Sport Shock (Rear)
Single Rear Shock for GMC Canyon
Ride height: 0-1.5 in rear
Mfg# E60-23-042-01-01
$213.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Reservoir (Rear)
Single Rear Shock for Lexus GX550
Ride height: 0-1.5 in rear
Mfg# E60-59-009-03-01
$414.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Sport Shock (Rear)
Single Rear Shock for Ram 2500
Ride height: 0-1.5 in rear
Mfg# E60-27-006-03-01
$213.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
-
PRO-TRUCK Sport Shock (Rear)
Single Rear Shock for Toyota Land Cruiser
Ride height: 0-2.5 in rear
Mfg# E60-82-086-01-01
$213.99
Availability: In Stock (USA) This product ships directly from Eibach USA.
Free shipping in Canada, ships Oct 14
More products
All product lines-
Performance Lift Kits
PRO-TRUCK LIFT STAGE 1
Entry-level Pro-Truck suspension system featuring clip-adjustable front shocks for improved ride quality, handling, and lift.
71 parts
-
Truck Accessories
LIFT BLOCKS
Precision-engineered lift blocks designed to increase rear ride height while maintaining proper axle alignment and durability.
2 parts
-
Race Springs
Coilover Springs
High-performance motorsport coilover springs precision engineered for maximum consistency, responsiveness, and tuning flexibility.
817 parts
-
Handling Performance
END-LINKS
Heavy-duty adjustable end-links that maximize sway bar performance while providing increased strength and durability.
79 parts
-
UTV Suspension
PRO-SPACER
Hub-centric wheel spacers that improve wheel fitment, widen track width, and enhance vehicle stance and stability.
252 parts
-
Moto Springs
MOTO Springs
Precision-wound fork and rear shock springs engineered to improve control, traction, and rider confidence on any terrain.
361 parts